1.Stop jaw crusher working per several months, checking the machiney. When start or stop the jaw crusher to deal with your raw material, you should pay attention to the jaw crushing machine abrasion condition regular, the abrasion parts: center feeding pipe, cone hat, impeller, liner, wear-resistant block wear degree, replacement the wear serious parts, repair them. As well as replace the parts according to the organic technical parameters(include the model, weight,dimension,etc).
2.Checking the belt regularly. Belt is indispensable in the jaw crushing stone production line, it provide driving power for the plant. Adjust belt tightness degree regular, make sure belt be forced uniform. If the jaw crusher with two motor, each side belt length should as consistent as possible, any abrasion serious should be replaced timely.
3.The equipment spare parts lubricating. Add some grease per 400 hour working time; Every 2000 hour working time, open main bearings and clean it; Generally after 7200 hours working time, you should replace new bearings.
Besides, to make sure the jaw crusher working normally, in addition to operate the jaw crusher correct, maintenance must be planned, include daily maintance.
http://www.kf-machinery.com/
没有评论:
发表评论